WIM SPOT WELDER
Model:MC
MC: With Electronic timer and mechanical
WELDS
MC: With Electronic timer and mechanical
WELDS
- Welding Process
- Resistance Spot Welding
- Good working performance through thyristor controlled circuit eliminating contractors. Long serviceable life.
- Power saving though usage of high quality conductive material and superior secondary circuit.
- Efficient after cooling circuit.
- Lower exhaust noise through unique construction.
- Safe usage through high insulation techniques.
- 2 years limited warranty.
| TECHNICAL CHARACTERISTICS | MC 15 | MC 25 | |
| Rated Capacity (KVA) | 15 | 25 | |
| Rated Primary Voltage (V) | 230/415 | 230/415 | |
| SPOT | Rated Frequency (Hz) | 50/60 | 50/60 |
| Rated Maximum Input (KVA) | 20 | 45 | |
| Duty Cycle (%) | 9 | 9.2 | |
| Rated Secondary Current (max) (A) | 7,500 | 12,000 | |
| Dimension of Throat Depth (Depth,Opening) (mm) | 300,150 | 330,150 | |
| Tip Holder (Diameter,Length) (mm) | 22,153 | 22,153 | |
| Tip (Diameter, Taper) (mm, 1/5) | 16, 1/5 | 16, 1/5 | |
| Maximum Electrode Force (kg) | 180 | 320 | |
| Quantity of Cooling Water (L/min) | 6 | 6 | |
| Net Weight (approximately) (kg | 118 | 158 | |
| Diamension (L x W x H) (mm) | 750*335*1190 | 830*375*1190 | |
